How to Connect Canon PIXMA MX490 to WiFi: A Step-by-Step Guide

Connecting your Canon PIXMA MX490 printer to your wireless network is a straightforward process. Following the detailed steps outlined below, you can successfully connect your printer to Wi-Fi and ensure seamless printing from your computer or mobile device. Whether you prefer using WPS or manually entering the Wi-Fi credentials, this guide covers all necessary procedures.

Step-by-Step Guide to Connect Canon PIXMA MX490 to WiFi

Step 1: Prepare Your Printer

Turn on the Printer: Ensure your Canon PIXMA MX490 printer is powered on. Locate the power switch and turn it on. Check the Wireless Button: Look for the wireless light located on the printer. If the light is flashing, press the Wi-Fi button on the control panel. Continue pressing until the light becomes steady. This sets the printer to Wi-Fi mode.

Step 2: Connect to Wi-Fi

Press the Wi-Fi Button: On the printer's control panel, press and hold the Wi-Fi button until the Wi-Fi light starts to flash. This initiates the connection process. Enable WPS: After the Wi-Fi light starts flashing, quickly press the Color button to initiate the WPS (Wi-Fi Protected Setup) process. This is a faster and easier way to connect your printer to the Wi-Fi network.

Step 3: WPS Setup (if available)

Router Setting: Within 2 minutes, press the WPS button on your wireless router. The printer should automatically connect to the Wi-Fi network. Check Connection Status: Once connected, the Wi-Fi light on the printer should stop flashing and remain lit, indicating a successful connection.

Step 4: Manual Connection (if WPS is not available)

Install Software: If WPS is not supported by your router, download and install the Canon PRINT app or the printer driver from the Canon website on your computer or mobile device. Open the App/Driver: Launch the app or driver and select the Wireless LAN Setup option. Follow Prompts: Follow the on-screen prompts to select your Wi-Fi network and enter the Wi-Fi password when prompted. This method ensures a secure connection without the need for a physical button press.

Additional Tips

Avoid Obstacles: Ensure your printer and router are within range of each other to avoid signal issues. Restart Devices: If you encounter issues, restart both the printer and the router and try the setup process again. This can often resolve temporary connectivity problems. Seek Help: For more specific guidance, feel free to contact me or refer to the official Canon support documentation.

Conclusion

Connecting your Canon PIXMA MX490 to Wi-Fi is a simple and essential step for enhancing your printing experience. With the steps provided here, you can ensure a successful and seamless connection, making it easier to print from anywhere in your home or office.