How to Install TWRP and Root Samsung Galaxy S6/S6 Edge on Android 7.0 Nougat

As a Google SEO professional, the aim is to create content that is not only informative but also optimized for search engines. This guide will help you understand the process of installing TWRP and rooting your Samsung Galaxy S6 or S6 Edge running on Android 7.0 Nougat. This method ensures that you follow all necessary steps and precautions to avoid any device issues. Remember, this guide is intended for advanced users and should be performed with caution.

Is Rooting Right for You?

While rooting your device offers several benefits, such as customizing your interface and removing restrictions, it's important to understand the risks. Rooting voids your warranty, allows potential malware to exploit your device, and can brick your phone if not done correctly. Ensure you have a full backup of your device before proceeding.

Requirements and Prerequisites

Official Android 7.0 Nougat firmware on your Samsung Galaxy S6 or S6 Edge Your device charged to at least 50% to avoid unexpected shutdowns during the rooting process USB drivers installed on your PC USB cable to connect your device to the PC Enabled USB debugging, OEM unlock, and developer options on your device

Step-by-Step Guide to Install TWRP and Rooting

1. Downloading Required Files

For this process, you'll need:

Odin 3.12.3 TWRP Recovery for Galaxy S6 G920F, G920FD, and G920I TWRP Recovery for Galaxy S6 Edge G925F, G925FD, and G925I Magisk Manager v15.1

Download and copy these files to your device's internal storage.

2. Enabling Developer Options and USB Debugging

Safeguard and customize your device by enabling developer options and USB debugging through the following steps:

Go to Settings About Device and tap Build Number 7 times to unlock developer options. Go to Settings Developer Options. Ensure that USB debugging is enabled. Enable OEM unlocking under Developer Options.

3. Booting into Download Mode

Put your device into download mode by performing the following on a powered-off device:

Press and hold the Power, Volume Down, and Home keys together. Release the Power and Home keys, and continue holding Volume Down. Press the Volume Up key to enter download mode.

4. Installing TWRP Using Odin

Open Odin on your PC and ensure your device is visible. Follow these steps:

Select the AP tab and choose the appropriate TWRP file for your device. Click on F. Reset Time to ensure proper time settings. Press the Start button in Odin to begin the flashing process. Wait for the flash to complete. Do NOT reboot your device after completion.

5. Booting into TWRP Recovery

To boot into TWRP, use the following combination on your device:

Press and hold Volume Down, Home, and Power keys simultaneously. Switch to Volume Up key as soon as the screen goes back. Hold Power and Home keys, then press Volume Up.

If prompted, swipe to allow modifications. Then, select Install, locate the Magisk file, and follow the prompts to complete the installation.

6. Verifying the Installation

Install Magisk Manager from the Google Play Store and reboot your device. Verify the installation and settings through the Magisk app.

This guide has been meticulously crafted to provide a comprehensive, step-by-step process for installing TWRP and rooting your Samsung Galaxy S6 or S6 Edge on Android 7.0 Nougat. Always proceed with caution and ensure you have a backup of your data.