How to Reset an OVHD Decoder Without a Remote: Step-by-Step Guide

Introduction

We understand the frustration of having to reset your OVHD Overhead Digital decoder but not having a remote. Fortunately, there are several methods you can use to reset your device without the need for a remote. This guide will walk you through the steps of resetting your OVHD decoder using a power cycle, front panel buttons, and the manual. Additionally, we'll provide a detailed method for DStv decoders using your mobile phone as a reset prompt.

Power Cycle the Decoder for Reset

To reset your OVHD decoder, you can perform a power cycle. This involves unplugging the power cord from the back of your decoder or from the wall outlet and waiting for about 30 seconds. Then, plug it back in. This process often resets the device and resolves common issues.

Use Front Panel Buttons for Reset

Another method is to use the front panel buttons on your decoder. Look for a button labeled 'Reset' or 'Factory Restore'. Holding this button for a few seconds can initiate a reset process. If your device does not have such a labeled button, check your user manual for specific instructions.

Check for a Reset Button on the Back or Bottom of the Decoder

Some decoders have a small reset button located at the back or bottom of the unit. You may need a pin or a paperclip to press it. Hold this button down for a few seconds to perform the reset.

Refer to the User Manual for Specific Instructions

For detailed and specific instructions, always refer to your OVHD decoder's user manual. It is the best source for unique reset methods, especially if the standard methods do not work for your device.

Resetting DStv Explora Decoder Using Mobile Phone

For DStv Explora decoder users, there is a more intricate method to reset your device without a remote. Follow these steps:

First, unplug the power button from your DStv decoder and ensure it is completely turned off. Check by ensuring all its lights are off and none are blinking. Turn the decoder back on and press the reset button on it. This button is marked and usually located on the front panel, making it very hard to miss. While pressing the reset button, use your mobile phone to dial the reset prompt from Multichoice. You must use your registered number so that it is linked to your decoder. While this step is happening, your DStv decoder will blink to indicate the resetting process. Once the prompt from your phone is complete, you can release the reset button. The DStv decoder will complete the reset process and, if you are using a DStv Explora, it may reboot itself. All your changes will be saved, and your DStv decoder will be reset.

Getting Further Assistance

If these steps do not work, consider contacting the customer support of the manufacturer for further assistance. They can provide you with specialized support and guide you through any additional troubleshooting steps.