Refilling HP 680 Cartridges for HP 4535 Printers: A Comprehensive Guide
Yes, you can refill the HP 680 cartridge for an HP 4535 printer. However, it is important to take certain precautions to ensure the best results. This guide will walk you through the process step-by-step and address some key points to consider.
What You Need
Refilling your HP 680 cartridge does not have to be complex. All you need is a few basic supplies, which we will discuss in detail below.
Stage 1: Gathering Supplies
1. Printer-Ink
Printer-ink can be easily obtained from electronic or computer stores. In Bangalore, you can find it at an ink-refill shop located at the intersection of SP Road near City Mall. Ensure the ink you purchase is compatible with HP printers to avoid issues.
2. Syringe
A 1ml disposable syringe is the ideal choice. The smaller the needle, the better. This will ensure precise control over the ink flow, preventing any damage to the cartridge.
3. Your Printer Cartridge
Ensure you have the correct cartridge for your printer. For instance, if your printer uses an HP56 cartridge, the refill process will be similar for most inkjet cartridges.
Step-by-Step Refill Process
Stage 2: Accessing the Ink Cartridge
Upon opening the cartridge, you will notice a dark spot on the white sticker covering the front of the cartridge. Below this dark spot is an opening through which ink can be infused. You can peel off the sticker to reveal the opening or simply puncture the dark spot with a needle.
Stage 3: Refilling the Printer Cartridge
To refill the cartridge, use the syringe to draw ink slowly and then infuse it into the opening. That's it! Here are some important tips to keep in mind:
The needle is small. If you draw ink too quickly, you may create air bubbles. These air bubbles can block the ink cartridge. Make sure there are no air pockets before infusing ink. Refilling is a messy task. Have a piece of paper or waste cloth nearby to clean up any spills. Refill the cartridge to about 80-90% capacity. For example, if your cartridge's capacity is 19ml, fill it to around 15-17ml. This helps avoid any potential spillage. Avoid immediately using the cartridge. Instead, let it sit for a few hours. This allows the ink to settle at the bottom of the wick, which is located inside the cartridge and cannot be seen.Considerations and Tips
Refill Kit
A refill kit specifically designed for HP 680 cartridges, which includes ink syringes and instructions, is necessary for the process.
Quality of Ink
Using compatible ink is crucial. Non-compatible ink can cause print quality issues or even damage to the printer.
Warranty Concerns
Refilling cartridges can void any warranty on your printer. Consider whether your printer is still under warranty before proceeding.
Performance
Refilling may not always provide the same print quality or page yield as original cartridges. Be prepared for potential differences.
Environmental Considerations
Refilling cartridges is often a more environmentally friendly option compared to disposing of them. However, ensure that you handle the process responsibly to minimize environmental impact.